1984-1996 Half Shaft with Automatic or Manual Transmission
1982 Half Shaft with Automatic Transmission
1980-1981 Half Shaft with Manual Transmission
1963-1979 Half Shaft with Automatic or Manual Transmission
…
Greasable Units, Zerks Included
1997-1999 Half Shaft with Automatic or Manual Transmission
1982-1996 Drive Shaft with Automatic or Manual Transmission
1980-1981 Drive Shaft with Automatic Transmission
1980-1981 Drive Shaft with…
Non-Greasable
1997-1999 Half Shaft with Automatic or Manual Transmission
1982-1996 Drive Shaft with Automatic or Manual Transmission
1980-1981 Drive Shaft with Automatic Transmission
1980-1981 Drive Shaft with Manual…
55-67 Drive shaft front and rear
68-70 Excluding Turbo 400 trans front and rear
80-82 Automatic trans front and rear
80-81 4 Speed trans rear only
84-96 All
71-79 all Front and Rear Drive shaft use 582151
3 1/4" x 1 1/16" - 82.55mm x…
DANA SPICER 5-460X
1310 to 1350 Series Combination Universal Joint. This is a very popular and handy u-joint when connecting mismatched driveline components.
Use this to connect 1310 series components to 1350…
1 1/16" (1.063") caps and is 3 7/32" (3.219") wide one direction and 1 1/16" (1.063") caps by 3 5/8" (3.622") wide the other
This is a very popular and handy u-joint when connecting mismatched driveline components. Use this…
1-1/16" Cap
Greasable Units, Zerks Included
1980-1982 Drive Shaft with Automatic Transmission
1980-1982 Half Shaft with Automatic Transmission
1971-1979 Drive Shaft with Automatic or Manual Transmission
1968-1970 Drive Shaft…
Non-Greasable, 1-3/16" Cap
1984-1996 Half Shaft with Automatic or Manual Transmission
1980-1982 Half Shaft with Manual Transmission
1963-1979 Half Shaft with Automatic or Manual Transmission
All Spicer U-Joints are heat…
Non-Greasable, 1-3/16" Cap
1984-1996 Half Shaft with Automatic or Manual Transmission
1980-1982 Half Shaft with Manual Transmission
1963-1979 Half Shaft with Automatic or Manual Transmission
…
Non-Greasable, Cap is 1.125" and 3.625" Across
1980-1981 Half Shaft with Automatic Transmission
1980-1981 Drive Shaft with Manual Transmission (Use on Slip Yoke)
1975-1979 Drive Shaft with Automatic or Manual…
Driveshaft Flexible Joint Coupler bushing. Engineered from high-quality rubber with steel sleeves for long-lasting service, it effectively absorbs and reduces vibration between the driveshaft and transmission.DRIVESAHFT BUSHINGS…
Improved Strenght
Allows Use With More Horsepower Engines
8 Heavy Duty Caps
16 Bolts
Requires Drilling Of Exsisting Holes And Tapping Them To Accept The New Bolts Supplied
If you want peace of mind that your axle shaft u…
Improved Strenght
Allows Use With More Horsepower Engines
8 Heavy Duty Caps
16 Bolts
1 Drill Bit
1 Tap
Requires Drilling And Tapping
If you want peace of mind that your axle shaft u joints will hold up to increase…
Stock Replacement Fits 1980-81 With Automatic Transmission Fits 1982 All Fits 1984-96 All Used With Bolt P/N 25-103360 This stock replacement u-joint strap is manufactured by GM or by one of its authorized suppliers for use as…