Removing the front license plate from your C6 Corvette at car shows or at car washes has been a real chore...until now! It's 1/2" height ensures you'll clear most driveways and other parking obstacles. Installation requires drilling two small holes in your bumper...then, just bolt on and go! A durable flat black finish and high quality hardware stands the test of time.
NOTE: Bracket lowers ground clearance by approx 1/2 inch. Remove prior to entering automated car wash. Exercise care when entering or exiting steep driveways or damage will occur. Parking Stops or high curbs, stop well before or damage will occur! Requires the following tools: T15 Torx, 7mm & 10mm socket with ratchet, 1/4 inch drive referred but 3/8 will work but extra caution will be needed when tightening bolts.
Phillips screwdriver and 10mm wrench, 1/8 inch drill bit and drill.
| Make | Model | Years |
| Chevrolet | Corvette | 2005 - 2013 |
