- Powerful Solvent
- Removes Soil & Grime, Paint, & Varnish
- Cleans The Carburetor & Combustion Chamber Of Gas Engines
- Not For Sale In California
Carburetor Linkage and Choke: Make sure vehicle is off and engine
is cold. Remove air cleaner and spray carburetor and linkage thoroughly with
GUNK® Carburetor Parts Cleaner. Let soak and re-spray to flush off remaining
deposits. Clean Choke by working butterfly valve while spraying. Allow excess to
evaporate to avoid potential fire before starting vehicle. Throttle Plate and Throat:
To clean throttle plate and carburetor throat spray short bursts with engine
running and vehicle in neutral. Lightly rev engine to flush away deposits. After
cleaning replace any parts you may have disconnected. PVC Valve: Insert snorkel
into spray valve and use short bursts directly into PVC valve, working plunger back and forth. Manifold Heat Control: With engine off and cold, clean manifold
heat control by spraying both ends of heat riser shaft, moving counterweight
until valve moves freely. Allow excess to evaporate to avoid potential fire before
starting vehicle. PRODUCT WILL NOT HARM CATALYTIC CONVERTERS or OXYEGEN SENSORS.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
Corvette |
1953 - 2016 |
