One Of The Best Investments For Your Corvette
Replaces The Often Sun Cracked, Severely Worn Seal
Critical For Proper Water Protection
These are the inner beltline moldings that mounts on the left & right doors to sweep the…
Curved with holes like original with mounting kit
Overall Length = 30 3/8 inches, Width on back = 1/2 inch, Front width bead-to-bead = 11/16 inch
Your vent window channel is 34 inches, however the window run does not extend all the way to…
These window run channels are curved with holes like the original. Includes a mounting kit. These 1963-1967 Corvette C2 window run channels have an overall length of 30 1/4 inches. The width on the back is 1/2 inch, and the front width…
Kit includes:1963-1967 Coupe Front Window Runner (Curved with Mount)1964-1967 Upper/Rear Window Channel Correct1963-1967 Coupe Window Felt on Door Panel1953-1989 Stainless Steel Staples1963-1967 Coupe Outer Window Seal1963-1967 Outer…
These Corvette C1 window run rivets and screws are shown in the GM Assembly Instruction Manual, AIM, Section F, around Sheet 8.00. Set contains six rivets and six screws.DOORS GLASS WINDOWS FELTS SEALS MOUNTING…
Set comes with both left and right seals
Fits both Coupes and Convertibles
Correct rubber blade
Replaces the often sun cracked, severely worn, or shrunken window felts
Critical for proper water protection for your door…
This 1969-1982 Corvette inner window seal felt pair does both the left and right sides. Mounts to the top of the door panels with staples. The length is 32 1/2 inches.
DOORS GLASS WINDOWS FELTS SEALS WISKERS
…
The Classic Update Series kits are the most complete wiring kits on the market today and they “Make Wiring THAT Easy”. The Classic Update Series of kits modernizes the vehicle’s electrical system and allows expansion for additional…
1968 Coupe or Convertible door outer window seals (Fuzzies) with mounting push in clips installed. Sold as a pair
DOORS GLASS WINDOWS FELTS SEALS RUNS
…
Set Includes:
284060 1990-1996 Side Door Glass Inner Seal Strips
284067 1984-1996 Side Door Glass Outer Seal Strips
Correctly reproduced with rubber and felt glass scraper, outer seals include attached clips and pop rivets for…
* Sold in pairs.
* Beware of cheaper replacements that are difficult to install.
We've carried replacement window seals for years, but now we offer correct reproduction molded seals (molded as original - not extruded replacements with…
This is a black, steel, tubular rivet. They measure .142 inch diameter, and have a .150 inch reach. Use set tool 181116 (9/64 inch)DOORS GLASS WINDOW FELTS SEALS MOUNTING RIVETS…
* Sold in pairs.
* Beware of cheaper replacements that are difficult to install.
We've carried replacement window seals for years, but now we offer correct reproduction molded seals (molded as original - not extruded replacements with…
* Sold in pairs.
* Beware of cheaper replacements that are difficult to install.
We've carried replacement window seals for years, but now we offer correct reproduction molded seals (molded as original - not extruded replacements with…
Set Includes:
281007 56-62 Front Door Post Window Runs Replacement
312002 Stainless Steel Staples
281006 56-62 Inner / Outer Window Felts
281002 56-62 Front Window Run Mount
281008 56-67 Rear Window Run Liners
This set replaces #281018…
This door frame is complete and ready to install. This kit includes tinted glass with stainless steel trim mounted to the front channel. Pivots and seals are included in the weatherstrips. The kit also includes the special lower mounting…
* Sold in pairs.
* Beware of cheaper replacements that are difficult to install.
We've carried replacement window seals for years, but now we offer correct reproduction molded seals (molded as original - not extruded replacements with…
* Sold in pairs.
* Beware of cheaper replacements that are difficult to install.
We've carried replacement window seals for years, but now we offer correct reproduction molded seals (molded as original - not extruded replacements with…
* Sold in pairs.
* Beware of cheaper replacements that are difficult to install.
We've carried replacement window seals for years, but now we offer correct reproduction molded seals (molded as original - not extruded replacements with…
Kit includes:
632016 1964 Coupe Outer Window Seal
282103 1963-1967 Coupe Front Window Run (Curved with Mount)
282005 1964-19674 Upper and Rear Window Channel-Correct
312002 1953-1989 Stainless Steel Staples-25 pieces
282119 1964-1967 Coupe…
This door frame is complete and ready to install. This kit includes tinted glass with stainless steel trim mounted to the front channel. Pivots and seals are included in the weatherstrips. The kit also includes the special lower mounting…
The one-piece sealed housing is used to eliminate the use of multiple components and ensure the coolest air intake charge available. A large, clear sight window allows for filter inspection without removal of the air box. The housing…
The original Dominator® took carburetion to another level in 1969 when it was developed for NASCAR® racing. It has been refined over the years and has received its biggest change ever. The Gen 3 Ultra Dominator features a brand new…
The original Dominator® took carburetion to another level in 1969 when it was developed for NASCAR® racing. It has been refined over the years and has received its biggest change ever. The Gen 3 Ultra Dominator features a brand new…
The original Dominator® took carburetion to another level in 1969 when it was developed for NASCAR® racing. It has been refined over the years and has received its biggest change ever. The Gen 3 Ultra Dominator features a brand new…
The original Dominator® took carburetion to another level in 1969 when it was developed for NASCAR® racing. It has been refined over the years and has received its biggest change ever. The Gen 3 Ultra Dominator features a brand new…
The original Dominator® took carburetion to another level in 1969 when it was developed for NASCAR® racing. It has been refined over the years and has received its biggest change ever. The Gen 3 Ultra Dominator features a brand new…
The patent pending GEN 3 main–body is 5/16" taller than the previous generation! This new height allowed for larger radius air entries which were optimized using Computational Fluid Dynamics (CFD) software to deliver smoother flow into…
The original Dominator® took carburetion to another level in 1969 when it was developed for NASCAR® racing. It has been refined over the years and has received its biggest change ever. The Gen 3 Ultra Dominator features a brand new…
The original Dominator® took carburetion to another level in 1969 when it was developed for NASCAR® racing. It has been refined over the years and has received its biggest change ever. The Gen 3 Ultra Dominator features a brand new…
The original Dominator® took carburetion to another level in 1969 when it was developed for NASCAR® racing. It has been refined over the years and has received its biggest change ever. The Gen 3 Ultra Dominator features a brand new…
The original Dominator® took carburetion to another level in 1969 when it was developed for NASCAR® racing. It has been refined over the years and has received its biggest change ever. The Gen 3 Ultra Dominator features a brand new…
The original Dominator® took carburetion to another level in 1969 when it was developed for NASCAR® racing. It has been refined over the years and has received its biggest change ever. The Gen 3 Ultra Dominator features a brand new…